Smooth, Quiet Garage Door Operation Starts Here

Worn rollers and misaligned tracks make your door shake, grind, and eventually jump the track. Upgrading to sealed nylon rollers and re-aligning tracks keeps the door gliding smoothly for years. Cyber Garage Doors services every component of your lift system, from the roller stems to the horizontal track hangers, in a single appointment.

We combine roller replacement with a full tune-up: tightening hardware, lubricating hinges, and checking springs. This service pairs perfectly with annual maintenance or a noise reduction project.

Signs Your Rollers or Tracks Need Attention

  • Door jumps or shudders: Flat-spotted rollers or bent track brackets cause the door to lurch.
  • Metal-on-metal grinding: Bearings have worn out and the roller stem is dragging against the track.
  • Visible gaps: If the roller leaves the track, the door can drop or bind.
  • Rust or corrosion: Moisture eats away at roller housings and track edges, especially near the coastal areas of NJ.
  • Door drifts open: Misaligned tracks allow gravity to pull the door off balance, creating a safety risk.

Roller & Track Services We Offer

• Nylon Roller Upgrades

We replace noisy steel rollers with 13-ball bearing nylon rollers that glide quietly and reduce stress on your opener. Includes replacement of all hinge bolts and lubrication.

• Track Alignment & Reinforcement

We plumb, level, and secure vertical and horizontal tracks, replace bent brackets, and add structural reinforcement where needed. Perfect follow-up to an off-track repair.

• Safety Tune & Balance

Every roller service includes door balance testing, opener force calibration, and safety sensor verification so the entire system operates safely.

Roller & Track Repair Estimates

Our Roller & Track Service Process

  1. Inspection: We examine rollers, stems, bearings, hinges, and track brackets for wear or bending.
  2. Recommendation: You receive clear options: replace all rollers, adjust tracks, or address isolated issues.
  3. Replacement & Alignment: We remove old rollers, install new hardware, and align tracks using precision gauges.
  4. System Tune: Lubrication, balance test, and opener calibration ensure smooth operation.
  5. Final Testing: We run multiple open/close cycles and show you the difference in noise and track stability.

Frequently Asked Questions

Can I replace just a couple of rollers?

You could, but we recommend replacing all rollers at the same time so they wear evenly. Mixing new and old rollers often leads to repeated service calls. Complete replacement only takes about 45 minutes more than swapping a few.

How long does the service appointment take?

Roller upgrades take about 60-90 minutes. Adding track alignment or replacement can extend the visit to two hours. We arrive with all parts on the truck to complete the job in one trip.

Will you lubricate the door after installing nylon rollers?

Yes. We use a silicone-based lubricant on hinges and bearings. Nylon rollers require less lubrication than steel, but routine maintenance still extends life. We leave you with maintenance tips.

Do I need new tracks when I replace my rollers?

Not usually. If the track is structurally sound, we clean it, realign it, and secure brackets. We only recommend replacement if the track is severely bent, rusted through, or warped beyond repair.

Will roller upgrades void my door warranty?

No. Upgrading to premium nylon rollers maintains or improves safety and does not void manufacturer warranties. We provide documentation of all parts installed.